Viewing file:  swekey.php (15.45 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
<?php
/**
* Library that provides common functions that are used to help integrating Swekey Authentication in a PHP web site
* Version 1.0
*
* History:
* 1.2 Use curl (widely installed) to query the server
* Fixed a possible tempfile race attack
* Random token cache can now be disabled
* 1.1 Added Swekey_HttpGet function that support faulty servers
* Support for custom servers
* 1.0 First release
*
* @package Swekey
*/
/**
* Errors codes
*/
define("SWEKEY_ERR_INVALID_DEV_STATUS", 901); // The satus of the device is not SWEKEY_STATUS_OK
define("SWEKEY_ERR_INTERNAL", 902); // Should never occurd
define("SWEKEY_ERR_OUTDATED_RND_TOKEN", 910); // You random token is too old
define("SWEKEY_ERR_INVALID_OTP", 911); // The otp was not correct
/**
* Those errors are considered as an attack and your site will be blacklisted during one minute
* if you receive one of those errors
*/
define("SWEKEY_ERR_BADLY_ENCODED_REQUEST", 920);
define("SWEKEY_ERR_INVALID_RND_TOKEN", 921);
define("SWEKEY_ERR_DEV_NOT_FOUND", 922);
/**
* Default values for configuration.
*/
define('SWEKEY_DEFAULT_CHECK_SERVER', 'https://auth-check.musbe.net');
define('SWEKEY_DEFAULT_RND_SERVER', 'https://auth-rnd-gen.musbe.net');
define('SWEKEY_DEFAULT_STATUS_SERVER', 'https://auth-status.musbe.net');
/**
* The last error of an operation is alway put in this global var
*/
global $gSwekeyLastError;
$gSwekeyLastError = 0;
global $gSwekeyLastResult;
$gSwekeyLastResult = "<not set>";
/**
* Servers addresses
* Use the Swekey_SetXxxServer($server) functions to set them
*/
global $gSwekeyCheckServer;
if (! isset($gSwekeyCheckServer)) {
$gSwekeyCheckServer = SWEKEY_DEFAULT_CHECK_SERVER;
}
global $gSwekeyRndTokenServer;
if (! isset($gSwekeyRndTokenServer)) {
$gSwekeyRndTokenServer = SWEKEY_DEFAULT_RND_SERVER;
}
global $gSwekeyStatusServer;
if (! isset($gSwekeyStatusServer)) {
$gSwekeyStatusServer = SWEKEY_DEFAULT_STATUS_SERVER;
}
global $gSwekeyCA;
global $gSwekeyTokenCacheEnabled;
if (! isset($gSwekeyTokenCacheEnabled)) {
$gSwekeyTokenCacheEnabled = true;
}
/**
* Change the address of the Check server.
* If $server is empty the default value 'http://auth-check.musbe.net' will be used
*
* @param int $server The protocol and hostname to use
*
* @access public
*/
function Swekey_SetCheckServer($server)
{
global $gSwekeyCheckServer;
if (empty($server)) {
$gSwekeyCheckServer = SWEKEY_DEFAULT_CHECK_SERVER;
} else {
$gSwekeyCheckServer = $server;
}
}
/**
* Change the address of the Random Token Generator server.
* If $server is empty the default value 'http://auth-rnd-gen.musbe.net' will be used
*
* @param int $server The protocol and hostname to use
*
* @access public
*/
function Swekey_SetRndTokenServer($server)
{
global $gSwekeyRndTokenServer;
if (empty($server)) {
$gSwekeyRndTokenServer = SWEKEY_DEFAULT_RND_SERVER;
} else {
$gSwekeyRndTokenServer = $server;
}
}
/**
* Change the address of the Satus server.
* If $server is empty the default value 'http://auth-status.musbe.net' will be used
*
* @param int $server The protocol and hostname to use
*
* @access public
*/
function Swekey_SetStatusServer($server)
{
global $gSwekeyStatusServer;
if (empty($server)) {
$gSwekeyStatusServer = SWEKEY_DEFAULT_STATUS_SERVER;
} else {
$gSwekeyStatusServer = $server;
}
}
/**
* Change the certificat file in case of the the severs use https instead of http
*
* @param string $cafile The path of the crt file to use
*
* @access public
*/
function Swekey_SetCAFile($cafile)
{
global $gSwekeyCA;
$gSwekeyCA = $cafile;
}
/**
* Enable or disable the random token caching
* Because everybody has full access to the cache file, it can be a DOS vulnerability
* So disable it if you are running in a non secure enviromnement
*
* @param $enable
*
* @access public
*/
function Swekey_EnableTokenCache($enable)
{
global $gSwekeyTokenCacheEnabled;
$gSwekeyTokenCacheEnabled = ! empty($enable);
}
/**
* Return the last error.
*
* @return string The Last Error
* @access public
*/
function Swekey_GetLastError()
{
global $gSwekeyLastError;
return $gSwekeyLastError;
}
/**
* Return the last result.
*
* @return string The Last Error
* @access public
*/
function Swekey_GetLastResult()
{
global $gSwekeyLastResult;
return $gSwekeyLastResult;
}
/**
* Send a synchronous request to the server.
* This function manages timeout then will not block if one of the server is down
*
* @param string $url The url to get
* @param string $response_code The response code
*
* @return string The body of the response or "" in case of error
* @access private
*/
function Swekey_HttpGet($url, &$response_code)
{
global $gSwekeyLastError;
$gSwekeyLastError = 0;
global $gSwekeyLastResult;
$gSwekeyLastResult = "<not set>";
// use curl if available
if (function_exists('curl_init')) {
$sess = curl_init($url);
if (substr($url, 0, 8) == "https://") {
global $gSwekeyCA;
if (! empty($gSwekeyCA)) {
if (file_exists($gSwekeyCA)) {
if (! curl_setopt($sess, CURLOPT_CAINFO, $gSwekeyCA)) {
error_log(
"SWEKEY_ERROR:Could not set CA file : ".curl_error($sess)
);
} else {
$caFileOk = true;
}
} else {
error_log(
"SWEKEY_ERROR:Could not find CA file $gSwekeyCA getting $url"
);
}
}
curl_setopt($sess, CURLOPT_SSL_VERIFYHOST, '2');
curl_setopt($sess, CURLOPT_SSL_VERIFYPEER, '1');
curl_setopt($sess, CURLOPT_CONNECTTIMEOUT, '20');
curl_setopt($sess, CURLOPT_TIMEOUT, '20');
} else {
curl_setopt($sess, CURLOPT_CONNECTTIMEOUT, '3');
curl_setopt($sess, CURLOPT_TIMEOUT, '5');
}
curl_setopt($sess, CURLOPT_RETURNTRANSFER, '1');
$res=curl_exec($sess);
$response_code = curl_getinfo($sess, CURLINFO_HTTP_CODE);
$curlerr = curl_error($sess);
curl_close($sess);
if ($response_code == 200) {
$gSwekeyLastResult = $res;
return $res;
}
if (! empty($response_code)) {
$gSwekeyLastError = $response_code;
error_log(
"SWEKEY_ERROR:Error $gSwekeyLastError ($curlerr) getting $url"
);
return "";
}
$response_code = 408; // Request Timeout
$gSwekeyLastError = $response_code;
error_log("SWEKEY_ERROR:Error $curlerr getting $url");
return "";
}
// use pecl_http if available
if (class_exists('HttpRequest')) {
// retry if one of the server is down
for ($num=1; $num <= 3; $num++ ) {
$r = new HttpRequest($url);
$options = array('timeout' => '3');
if (substr($url, 0, 6) == "https:") {
$sslOptions = array();
$sslOptions['verifypeer'] = true;
$sslOptions['verifyhost'] = true;
$capath = __FILE__;
$name = strrchr($capath, '/');
// windows
if (empty($name)) {
$name = strrchr($capath, '\\');
}
$capath = substr($capath, 0, strlen($capath) - strlen($name) + 1)
. 'musbe-ca.crt';
if (! empty($gSwekeyCA)) {
$sslOptions['cainfo'] = $gSwekeyCA;
}
$options['ssl'] = $sslOptions;
}
$r->setOptions($options);
/*
try
{
*/
$reply = $r->send();
$res = $reply->getBody();
$info = $r->getResponseInfo();
$response_code = $info['response_code'];
if ($response_code != 200) {
$gSwekeyLastError = $response_code;
error_log(
"SWEKEY_ERROR:Error ".$gSwekeyLastError." getting ".$url
);
return "";
}
$gSwekeyLastResult = $res;
return $res;
/*
}
catch (HttpException $e)
{
error_log("SWEKEY_WARNING:HttpException ".$e." getting ".$url);
}
*/
}
$response_code = 408; // Request Timeout
$gSwekeyLastError = $response_code;
error_log("SWEKEY_ERROR:Error ".$gSwekeyLastError." getting ".$url);
return "";
}
global $http_response_header;
$res = @file_get_contents($url);
$response_code = substr($http_response_header[0], 9, 3); //HTTP/1.0
if ($response_code == 200) {
$gSwekeyLastResult = $res;
return $res;
}
$gSwekeyLastError = $response_code;
error_log("SWEKEY_ERROR:Error ".$response_code." getting ".$url);
return "";
}
/**
* Get a Random Token from a Token Server
* The RT is a 64 vhars hexadecimal value
* You should better use Swekey_GetFastRndToken() for performance
* @access public
*/
function Swekey_GetRndToken()
{
global $gSwekeyRndTokenServer;
return Swekey_HttpGet($gSwekeyRndTokenServer.'/FULL-RND-TOKEN', $response_code);
}
/**
* Get a Half Random Token from a Token Server
* The RT is a 64 vhars hexadecimal value
* Use this value if you want to make your own Swekey_GetFastRndToken()
* @access public
*/
function Swekey_GetHalfRndToken()
{
global $gSwekeyRndTokenServer;
return Swekey_HttpGet($gSwekeyRndTokenServer.'/HALF-RND-TOKEN', $response_code);
}
/**
* Get a Half Random Token
* The RT is a 64 vhars hexadecimal value
* This function get a new random token and reuse it.
* Token are refetched from the server only once every 30 seconds.
* You should always use this function to get half random token.
* @access public
*/
function Swekey_GetFastHalfRndToken()
{
global $gSwekeyTokenCacheEnabled;
$res = "";
$cachefile = "";
// We check if we have a valid RT is the session
if (isset($_SESSION['rnd-token-date'])) {
if (time() - $_SESSION['rnd-token-date'] < 30) {
$res = $_SESSION['rnd-token'];
}
}
// If not we try to get it from a temp file (PHP >= 5.2.1 only)
if (strlen($res) != 32 && $gSwekeyTokenCacheEnabled) {
if (function_exists('sys_get_temp_dir')) {
$tempdir = sys_get_temp_dir();
$cachefile = $tempdir."/swekey-rnd-token-".get_current_user();
$modif = filemtime($cachefile);
if ($modif != false) {
if (time() - $modif < 30) {
$res = @file_get_contents($cachefile);
if (strlen($res) != 32) {
$res = "";
} else {
$_SESSION['rnd-token'] = $res;
$_SESSION['rnd-token-date'] = $modif;
}
}
}
}
}
// If we don't have a valid RT here we have to get it from the server
if (strlen($res) != 32) {
$res = substr(Swekey_GetHalfRndToken(), 0, 32);
$_SESSION['rnd-token'] = $res;
$_SESSION['rnd-token-date'] = time();
if (! empty($cachefile)) {
// we unlink the file so no possible tempfile race attack
unlink($cachefile);
$file = fopen($cachefile, "x");
if ($file != false) {
@fwrite($file, $res);
@fclose($file);
}
}
}
return $res."00000000000000000000000000000000";
}
/**
* Get a Random Token
* The RT is a 64 vhars hexadecimal value
* This function generates a unique random token for each call but call the
* server only once every 30 seconds.
* You should always use this function to get random token.
* @access public
*/
function Swekey_GetFastRndToken()
{
$res = Swekey_GetFastHalfRndToken();
if (strlen($res) == 64) {
return substr($res, 0, 32).strtoupper(md5("Musbe Authentication Key" . mt_rand() . date(DATE_ATOM)));
}
return "";
}
/**
* Checks that an OTP generated by a Swekey is valid
*
* @param mixed $id The id of the swekey
* @param mixed $rt The random token used to generate the otp
* @param mixed $otp The otp generated by the swekey
*
* @return boolean Success
* @access public
*/
function Swekey_CheckOtp($id, $rt, $otp)
{
global $gSwekeyCheckServer;
$res = Swekey_HttpGet(
$gSwekeyCheckServer.'/CHECK-OTP/'.$id.'/'.$rt.'/'.$otp,
$response_code
);
return $response_code == 200 && $res == "OK";
}
/**
* Values that are associated with a key.
* The following values can be returned by the Swekey_GetStatus() function
*/
define("SWEKEY_STATUS_OK", 0);
define("SWEKEY_STATUS_NOT_FOUND", 1); // The key does not exist in the db
define("SWEKEY_STATUS_INACTIVE", 2); // The key has never been activated
define("SWEKEY_STATUS_LOST", 3); // The user has lost his key
define("SWEKEY_STATUS_STOLEN", 4); // The key was stolen
define("SWEKEY_STATUS_FEE_DUE", 5); // The annual fee was not paid
define("SWEKEY_STATUS_OBSOLETE", 6); // The hardware is no longer supported
define("SWEKEY_STATUS_UNKOWN", 201); // We could not connect to the authentication server
/**
* Values that are associated with a key.
* The Javascript Api can also return the following values
*/
define("SWEKEY_STATUS_REPLACED", 100); // This key has been replaced by a backup key
define("SWEKEY_STATUS_BACKUP_KEY", 101); // This key is a backup key that is not activated yet
define("SWEKEY_STATUS_NOTPLUGGED", 200); // This key is not plugged in the computer
/**
* Return the text corresponding to the integer status of a key
*
* @param int $status The status
*
* @return string The text corresponding to the status
* @access public
*/
function Swekey_GetStatusStr($status)
{
switch($status)
{
case SWEKEY_STATUS_OK :
return 'OK';
case SWEKEY_STATUS_NOT_FOUND :
return 'Key does not exist in the db';
case SWEKEY_STATUS_INACTIVE :
return 'Key not activated';
case SWEKEY_STATUS_LOST :
return 'Key was lost';
case SWEKEY_STATUS_STOLEN :
return 'Key was stolen';
case SWEKEY_STATUS_FEE_DUE :
return 'The annual fee was not paid';
case SWEKEY_STATUS_OBSOLETE :
return 'Key no longer supported';
case SWEKEY_STATUS_REPLACED :
return 'This key has been replaced by a backup key';
case SWEKEY_STATUS_BACKUP_KEY :
return 'This key is a backup key that is not activated yet';
case SWEKEY_STATUS_NOTPLUGGED :
return 'This key is not plugged in the computer';
case SWEKEY_STATUS_UNKOWN :
return 'Unknow Status, could not connect to the authentication server';
}
return 'unknown status '.$status;
}
/**
* If your web site requires a key to login you should check that the key
* is still valid (has not been lost or stolen) before requiring it.
* A key can be authenticated only if its status is SWEKEY_STATUS_OK
*
* @param mixed $id The id of the swekey
*
* @return int The status of the swekey
* @access public
*/
function Swekey_GetStatus($id)
{
global $gSwekeyStatusServer;
$res = Swekey_HttpGet($gSwekeyStatusServer.'/GET-STATUS/'.$id, $response_code);
if ($response_code == 200) {
return intval($res);
}
return SWEKEY_STATUS_UNKOWN;
}
|