Viewing file:  sensors.h (16.38 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
sensors.h - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef SENSORS_SENSORS_H
#define SENSORS_SENSORS_H
/* The maximum length of the prefix */
#define SENSORS_PREFIX_MAX 20
/* IDs -- Use DRIVERIDs 1000-1999 for sensors.
Other drivers define the id in linux/i2c.h */
#define I2C_DRIVERID_LM78 1002
#define I2C_DRIVERID_LM75 1003
#define I2C_DRIVERID_GL518 1004
#define I2C_DRIVERID_EEPROM 1005
#define I2C_DRIVERID_W83781D 1006
#define I2C_DRIVERID_LM80 1007
#define I2C_DRIVERID_ADM1021 1008
#define I2C_DRIVERID_ADM9240 1009
#define I2C_DRIVERID_LTC1710 1010
#define I2C_DRIVERID_SIS5595 1011
#define I2C_DRIVERID_ICSPLL 1012
#define I2C_DRIVERID_BT869 1013
#define I2C_DRIVERID_MAXILIFE 1014
#define I2C_DRIVERID_MATORB 1015
#define I2C_DRIVERID_GL520 1016
#define I2C_DRIVERID_THMC50 1017
#define I2C_DRIVERID_DDCMON 1018
#define I2C_DRIVERID_VIA686A 1019
#define I2C_DRIVERID_ADM1025 1020
#define I2C_DRIVERID_LM87 1021
#define I2C_DRIVERID_PCF8574 1022
#define I2C_DRIVERID_MTP008 1023
#define I2C_DRIVERID_DS1621 1024
/* Sysctl IDs */
#ifdef DEV_HWMON
#define DEV_SENSORS DEV_HWMON
#else /* ndef DEV_HWMOM */
#define DEV_SENSORS 2 /* The id of the lm_sensors directory within the
dev table */
#endif /* def DEV_HWMON */
#define SENSORS_CHIPS 1
struct sensors_chips_data {
int sysctl_id;
char name[SENSORS_PREFIX_MAX + 13];
};
#define LM78_SYSCTL_IN0 1000 /* Volts * 100 */
#define LM78_SYSCTL_IN1 1001
#define LM78_SYSCTL_IN2 1002
#define LM78_SYSCTL_IN3 1003
#define LM78_SYSCTL_IN4 1004
#define LM78_SYSCTL_IN5 1005
#define LM78_SYSCTL_IN6 1006
#define LM78_SYSCTL_FAN1 1101 /* Rotations/min */
#define LM78_SYSCTL_FAN2 1102
#define LM78_SYSCTL_FAN3 1103
#define LM78_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
#define LM78_SYSCTL_VID 1300 /* Volts * 100 */
#define LM78_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define LM78_SYSCTL_ALARMS 2001 /* bitvector */
#define LM78_ALARM_IN0 0x0001
#define LM78_ALARM_IN1 0x0002
#define LM78_ALARM_IN2 0x0004
#define LM78_ALARM_IN3 0x0008
#define LM78_ALARM_IN4 0x0100
#define LM78_ALARM_IN5 0x0200
#define LM78_ALARM_IN6 0x0400
#define LM78_ALARM_FAN1 0x0040
#define LM78_ALARM_FAN2 0x0080
#define LM78_ALARM_FAN3 0x0800
#define LM78_ALARM_TEMP 0x0010
#define LM78_ALARM_BTI 0x0020
#define LM78_ALARM_CHAS 0x1000
#define LM78_ALARM_FIFO 0x2000
#define LM78_ALARM_SMI_IN 0x4000
#define W83781D_SYSCTL_IN0 1000 /* Volts * 100 */
#define W83781D_SYSCTL_IN1 1001
#define W83781D_SYSCTL_IN2 1002
#define W83781D_SYSCTL_IN3 1003
#define W83781D_SYSCTL_IN4 1004
#define W83781D_SYSCTL_IN5 1005
#define W83781D_SYSCTL_IN6 1006
#define W83781D_SYSCTL_IN7 1007
#define W83781D_SYSCTL_IN8 1008
#define W83781D_SYSCTL_FAN1 1101 /* Rotations/min */
#define W83781D_SYSCTL_FAN2 1102
#define W83781D_SYSCTL_FAN3 1103
#define W83781D_SYSCTL_TEMP1 1200 /* Degrees Celcius * 10 */
#define W83781D_SYSCTL_TEMP2 1201 /* Degrees Celcius * 10 */
#define W83781D_SYSCTL_TEMP3 1202 /* Degrees Celcius * 10 */
#define W83781D_SYSCTL_VID 1300 /* Volts * 100 */
#define W83781D_SYSCTL_PWM1 1401
#define W83781D_SYSCTL_PWM2 1402
#define W83781D_SYSCTL_PWM3 1403
#define W83781D_SYSCTL_PWM4 1404
#define W83781D_SYSCTL_SENS1 1501 /* 1, 2, or Beta (3000-5000) */
#define W83781D_SYSCTL_SENS2 1502
#define W83781D_SYSCTL_SENS3 1503
#define W83781D_SYSCTL_RT1 1601 /* 32-entry table */
#define W83781D_SYSCTL_RT2 1602 /* 32-entry table */
#define W83781D_SYSCTL_RT3 1603 /* 32-entry table */
#define W83781D_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define W83781D_SYSCTL_ALARMS 2001 /* bitvector */
#define W83781D_SYSCTL_BEEP 2002 /* bitvector */
#define W83781D_ALARM_IN0 0x0001
#define W83781D_ALARM_IN1 0x0002
#define W83781D_ALARM_IN2 0x0004
#define W83781D_ALARM_IN3 0x0008
#define W83781D_ALARM_IN4 0x0100
#define W83781D_ALARM_IN5 0x0200
#define W83781D_ALARM_IN6 0x0400
#define W83782D_ALARM_IN7 0x10000
#define W83782D_ALARM_IN8 0x20000
#define W83781D_ALARM_FAN1 0x0040
#define W83781D_ALARM_FAN2 0x0080
#define W83781D_ALARM_FAN3 0x0800
#define W83781D_ALARM_TEMP1 0x0010
#define W83781D_ALARM_TEMP23 0x0020 /* 781D only */
#define W83781D_ALARM_TEMP2 0x0020 /* 782D/783S */
#define W83781D_ALARM_TEMP3 0x2000 /* 782D only */
#define W83781D_ALARM_CHAS 0x1000
#define LM75_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
#define ADM1021_SYSCTL_TEMP 1200
#define ADM1021_SYSCTL_REMOTE_TEMP 1201
#define ADM1021_SYSCTL_DIE_CODE 1202
#define ADM1021_SYSCTL_ALARMS 1203
#define ADM1021_ALARM_TEMP_HIGH 0x40
#define ADM1021_ALARM_TEMP_LOW 0x20
#define ADM1021_ALARM_RTEMP_HIGH 0x10
#define ADM1021_ALARM_RTEMP_LOW 0x08
#define ADM1021_ALARM_RTEMP_NA 0x04
#define GL518_SYSCTL_VDD 1000 /* Volts * 100 */
#define GL518_SYSCTL_VIN1 1001
#define GL518_SYSCTL_VIN2 1002
#define GL518_SYSCTL_VIN3 1003
#define GL518_SYSCTL_FAN1 1101 /* RPM */
#define GL518_SYSCTL_FAN2 1102
#define GL518_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
#define GL518_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define GL518_SYSCTL_ALARMS 2001 /* bitvector */
#define GL518_SYSCTL_BEEP 2002 /* bitvector */
#define GL518_SYSCTL_FAN1OFF 2003
#define GL518_SYSCTL_ITERATE 2004
#define GL518_ALARM_VDD 0x01
#define GL518_ALARM_VIN1 0x02
#define GL518_ALARM_VIN2 0x04
#define GL518_ALARM_VIN3 0x08
#define GL518_ALARM_TEMP 0x10
#define GL518_ALARM_FAN1 0x20
#define GL518_ALARM_FAN2 0x40
#define GL520_SYSCTL_VDD 1000 /* Volts * 100 */
#define GL520_SYSCTL_VIN1 1001
#define GL520_SYSCTL_VIN2 1002
#define GL520_SYSCTL_VIN3 1003
#define GL520_SYSCTL_VIN4 1004
#define GL520_SYSCTL_FAN1 1101 /* RPM */
#define GL520_SYSCTL_FAN2 1102
#define GL520_SYSCTL_TEMP1 1200 /* Degrees Celcius * 10 */
#define GL520_SYSCTL_TEMP2 1201 /* Degrees Celcius * 10 */
#define GL520_SYSCTL_VID 1300
#define GL520_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define GL520_SYSCTL_ALARMS 2001 /* bitvector */
#define GL520_SYSCTL_BEEP 2002 /* bitvector */
#define GL520_SYSCTL_FAN1OFF 2003
#define GL520_SYSCTL_CONFIG 2004
#define GL520_ALARM_VDD 0x01
#define GL520_ALARM_VIN1 0x02
#define GL520_ALARM_VIN2 0x04
#define GL520_ALARM_VIN3 0x08
#define GL520_ALARM_TEMP1 0x10
#define GL520_ALARM_FAN1 0x20
#define GL520_ALARM_FAN2 0x40
#define GL520_ALARM_TEMP2 0x80
#define GL520_ALARM_VIN4 0x80
#define EEPROM_SYSCTL1 1000
#define EEPROM_SYSCTL2 1001
#define EEPROM_SYSCTL3 1002
#define EEPROM_SYSCTL4 1003
#define EEPROM_SYSCTL5 1004
#define EEPROM_SYSCTL6 1005
#define EEPROM_SYSCTL7 1006
#define EEPROM_SYSCTL8 1007
#define LM80_SYSCTL_IN0 1000 /* Volts * 100 */
#define LM80_SYSCTL_IN1 1001
#define LM80_SYSCTL_IN2 1002
#define LM80_SYSCTL_IN3 1003
#define LM80_SYSCTL_IN4 1004
#define LM80_SYSCTL_IN5 1005
#define LM80_SYSCTL_IN6 1006
#define LM80_SYSCTL_FAN1 1101 /* Rotations/min */
#define LM80_SYSCTL_FAN2 1102
#define LM80_SYSCTL_TEMP 1250 /* Degrees Celcius * 100 */
#define LM80_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define LM80_SYSCTL_ALARMS 2001 /* bitvector */
#define ADM9240_SYSCTL_IN0 1000 /* Volts * 100 */
#define ADM9240_SYSCTL_IN1 1001
#define ADM9240_SYSCTL_IN2 1002
#define ADM9240_SYSCTL_IN3 1003
#define ADM9240_SYSCTL_IN4 1004
#define ADM9240_SYSCTL_IN5 1005
#define ADM9240_SYSCTL_FAN1 1101 /* Rotations/min */
#define ADM9240_SYSCTL_FAN2 1102
#define ADM9240_SYSCTL_TEMP 1250 /* Degrees Celcius * 100 */
#define ADM9240_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define ADM9240_SYSCTL_ALARMS 2001 /* bitvector */
#define ADM9240_SYSCTL_ANALOG_OUT 2002
#define ADM9240_SYSCTL_VID 2003
#define ADM9240_ALARM_IN0 0x0001
#define ADM9240_ALARM_IN1 0x0002
#define ADM9240_ALARM_IN2 0x0004
#define ADM9240_ALARM_IN3 0x0008
#define ADM9240_ALARM_IN4 0x0100
#define ADM9240_ALARM_IN5 0x0200
#define ADM9240_ALARM_FAN1 0x0040
#define ADM9240_ALARM_FAN2 0x0080
#define ADM9240_ALARM_TEMP 0x0010
#define ADM9240_ALARM_CHAS 0x1000
#define ADM1025_SYSCTL_IN0 1000 /* Volts * 100 */
#define ADM1025_SYSCTL_IN1 1001
#define ADM1025_SYSCTL_IN2 1002
#define ADM1025_SYSCTL_IN3 1003
#define ADM1025_SYSCTL_IN4 1004
#define ADM1025_SYSCTL_IN5 1005
#define ADM1025_SYSCTL_RTEMP 1251
#define ADM1025_SYSCTL_TEMP 1250 /* Degrees Celcius * 100 */
#define ADM1025_SYSCTL_ALARMS 2001 /* bitvector */
#define ADM1025_SYSCTL_ANALOG_OUT 2002
#define ADM1025_SYSCTL_VID 2003
#define ADM1025_ALARM_IN0 0x0001
#define ADM1025_ALARM_IN1 0x0002
#define ADM1025_ALARM_IN2 0x0004
#define ADM1025_ALARM_IN3 0x0008
#define ADM1025_ALARM_IN4 0x0100
#define ADM1025_ALARM_IN5 0x0200
#define ADM1025_ALARM_RTEMP 0x0020
#define ADM1025_ALARM_TEMP 0x0010
#define LTC1710_SYSCTL_SWITCH_1 1000
#define LTC1710_SYSCTL_SWITCH_2 1001
#define LM80_ALARM_IN0 0x0001
#define LM80_ALARM_IN1 0x0002
#define LM80_ALARM_IN2 0x0004
#define LM80_ALARM_IN3 0x0008
#define LM80_ALARM_IN4 0x0010
#define LM80_ALARM_IN5 0x0020
#define LM80_ALARM_IN6 0x0040
#define LM80_ALARM_FAN1 0x0400
#define LM80_ALARM_FAN2 0x0800
#define LM80_ALARM_TEMP_HOT 0x0100
#define LM80_ALARM_TEMP_OS 0x2000
#define LM80_ALARM_CHAS 0x1000
#define LM80_ALARM_BTI 0x0200
#define LM80_ALARM_INT_IN 0x0080
#define MAXI_SYSCTL_FAN1 1101 /* Rotations/min */
#define MAXI_SYSCTL_FAN2 1102 /* Rotations/min */
#define MAXI_SYSCTL_FAN3 1103 /* Rotations/min */
#define MAXI_SYSCTL_FAN4 1104 /* Rotations/min */
#define MAXI_SYSCTL_TEMP1 1201 /* Degrees Celcius */
#define MAXI_SYSCTL_TEMP2 1202 /* Degrees Celcius */
#define MAXI_SYSCTL_TEMP3 1203 /* Degrees Celcius */
#define MAXI_SYSCTL_TEMP4 1204 /* Degrees Celcius */
#define MAXI_SYSCTL_TEMP5 1205 /* Degrees Celcius */
#define MAXI_SYSCTL_TEMP6 1206 /* Degrees Celcius */
#define MAXI_SYSCTL_PLL 1301 /* MHz */
#define MAXI_SYSCTL_VID1 1401 /* Volts / 6.337, for nba just Volts */
#define MAXI_SYSCTL_VID2 1402 /* Volts */
#define MAXI_SYSCTL_VID3 1403 /* Volts */
#define MAXI_SYSCTL_VID4 1404 /* Volts */
#define MAXI_SYSCTL_VID5 1405 /* Volts */
#define MAXI_SYSCTL_LCD1 1501 /* Line 1 of LCD */
#define MAXI_SYSCTL_LCD2 1502 /* Line 2 of LCD */
#define MAXI_SYSCTL_LCD3 1503 /* Line 3 of LCD */
#define MAXI_SYSCTL_LCD4 1504 /* Line 4 of LCD */
#define MAXI_SYSCTL_ALARMS 2001 /* Bitvector (see below) */
#define MAXI_ALARM_VID4 0x0001
#define MAXI_ALARM_TEMP2 0x0002
#define MAXI_ALARM_VID1 0x0004
#define MAXI_ALARM_VID2 0x0008
#define MAXI_ALARM_VID3 0x0010
#define MAXI_ALARM_PLL 0x0080
#define MAXI_ALARM_TEMP4 0x0100
#define MAXI_ALARM_TEMP5 0x0200
#define MAXI_ALARM_FAN1 0x1000
#define MAXI_ALARM_FAN2 0x2000
#define MAXI_ALARM_FAN3 0x4000
#define MAXI_ALARM_FAN 0x0100 /* To be used with MaxiLife'99 */
#define MAXI_ALARM_VID 0x0200 /* The MSB specifies which sensor */
#define MAXI_ALARM_TEMP 0x0400 /* in the alarm group failed, i.e.: */
#define MAXI_ALARM_VADD 0x0800 /* 0x0402 = TEMP2 failed = CPU2 temp */
#define SIS5595_SYSCTL_IN0 1000 /* Volts * 100 */
#define SIS5595_SYSCTL_IN1 1001
#define SIS5595_SYSCTL_IN2 1002
#define SIS5595_SYSCTL_IN3 1003
#define SIS5595_SYSCTL_FAN1 1101 /* Rotations/min */
#define SIS5595_SYSCTL_FAN2 1102
#define SIS5595_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
#define SIS5595_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define SIS5595_SYSCTL_ALARMS 2001 /* bitvector */
#define SIS5595_ALARM_IN0 0x01
#define SIS5595_ALARM_IN1 0x02
#define SIS5595_ALARM_IN2 0x04
#define SIS5595_ALARM_IN3 0x08
#define SIS5595_ALARM_TEMP 0x10
#define SIS5595_ALARM_BTI 0x20
#define SIS5595_ALARM_FAN1 0x40
#define SIS5595_ALARM_FAN2 0x80
#define VIA686A_SYSCTL_IN0 1000
#define VIA686A_SYSCTL_IN1 1001
#define VIA686A_SYSCTL_IN2 1002
#define VIA686A_SYSCTL_IN3 1003
#define VIA686A_SYSCTL_IN4 1004
#define VIA686A_SYSCTL_FAN1 1101
#define VIA686A_SYSCTL_FAN2 1102
#define VIA686A_SYSCTL_TEMP 1200
#define VIA686A_SYSCTL_TEMP2 1201
#define VIA686A_SYSCTL_TEMP3 1202
#define VIA686A_SYSCTL_FAN_DIV 2000
#define VIA686A_SYSCTL_ALARMS 2001
#define VIA686A_ALARM_IN0 0x01
#define VIA686A_ALARM_IN1 0x02
#define VIA686A_ALARM_IN2 0x04
#define VIA686A_ALARM_IN3 0x08
#define VIA686A_ALARM_TEMP 0x10
#define VIA686A_ALARM_FAN1 0x40
#define VIA686A_ALARM_FAN2 0x80
#define VIA686A_ALARM_IN4 0x100
#define VIA686A_ALARM_TEMP2 0x800
#define VIA686A_ALARM_CHAS 0x1000
#define VIA686A_ALARM_TEMP3 0x8000
#define ICSPLL_SYSCTL1 1000
#define BT869_SYSCTL_STATUS 1000
#define BT869_SYSCTL_NTSC 1001
#define BT869_SYSCTL_HALF 1002
#define BT869_SYSCTL_RES 1003
#define BT869_SYSCTL_COLORBARS 1004
#define BT869_SYSCTL_DEPTH 1005
#define MATORB_SYSCTL_DISP 1000
#define THMC50_SYSCTL_TEMP 1200 /* Degrees Celcius */
#define THMC50_SYSCTL_REMOTE_TEMP 1201 /* Degrees Celcius */
#define THMC50_SYSCTL_INTER 1202
#define THMC50_SYSCTL_INTER_MASK 1203
#define THMC50_SYSCTL_DIE_CODE 1204
#define THMC50_SYSCTL_ANALOG_OUT 1205
#define DDCMON_SYSCTL_ID 1010
#define DDCMON_SYSCTL_SIZE 1011
#define DDCMON_SYSCTL_SYNC 1012
#define DDCMON_SYSCTL_TIMINGS 1013
#define DDCMON_SYSCTL_SERIAL 1014
#define LM87_SYSCTL_IN0 1000 /* Volts * 100 */
#define LM87_SYSCTL_IN1 1001
#define LM87_SYSCTL_IN2 1002
#define LM87_SYSCTL_IN3 1003
#define LM87_SYSCTL_IN4 1004
#define LM87_SYSCTL_IN5 1005
#define LM87_SYSCTL_AIN1 1006
#define LM87_SYSCTL_AIN2 1007
#define LM87_SYSCTL_FAN1 1102
#define LM87_SYSCTL_FAN2 1103
#define LM87_SYSCTL_TEMP1 1250 /* Degrees Celcius * 100 */
#define LM87_SYSCTL_TEMP2 1251 /* Degrees Celcius * 100 */
#define LM87_SYSCTL_TEMP3 1252 /* Degrees Celcius * 100 */
#define LM87_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define LM87_SYSCTL_ALARMS 2001 /* bitvector */
#define LM87_SYSCTL_ANALOG_OUT 2002
#define LM87_SYSCTL_VID 2003
#define LM87_ALARM_IN0 0x0001
#define LM87_ALARM_IN1 0x0002
#define LM87_ALARM_IN2 0x0004
#define LM87_ALARM_IN3 0x0008
#define LM87_ALARM_TEMP1 0x0010
#define LM87_ALARM_TEMP2 0x0020
#define LM87_ALARM_TEMP3 0x0020 /* same?? */
#define LM87_ALARM_FAN1 0x0040
#define LM87_ALARM_FAN2 0x0080
#define LM87_ALARM_IN4 0x0100
#define LM87_ALARM_IN5 0x0200
#define LM87_ALARM_RESERVED1 0x0400
#define LM87_ALARM_RESERVED2 0x0800
#define LM87_ALARM_CHAS 0x1000
#define LM87_ALARM_THERM_SIG 0x2000
#define LM87_ALARM_TEMP2_FAULT 0x4000
#define LM87_ALARM_TEMP3_FAULT 0x08000
#define PCF8574_SYSCTL_STAT 1000
#define MTP008_SYSCTL_IN0 1000 /* Volts * 100 */
#define MTP008_SYSCTL_IN1 1001
#define MTP008_SYSCTL_IN2 1002
#define MTP008_SYSCTL_IN3 1003
#define MTP008_SYSCTL_IN4 1004
#define MTP008_SYSCTL_IN5 1005
#define MTP008_SYSCTL_IN6 1006
#define MTP008_SYSCTL_FAN1 1101 /* Rotations/min */
#define MTP008_SYSCTL_FAN2 1102
#define MTP008_SYSCTL_FAN3 1103
#define MTP008_SYSCTL_TEMP1 1200 /* Degrees Celcius * 10 */
#define MTP008_SYSCTL_TEMP2 1201 /* Degrees Celcius * 10 */
#define MTP008_SYSCTL_TEMP3 1202 /* Degrees Celcius * 10 */
#define MTP008_SYSCTL_VID 1300 /* Volts * 100 */
#define MTP008_SYSCTL_PWM1 1401
#define MTP008_SYSCTL_PWM2 1402
#define MTP008_SYSCTL_PWM3 1403
#define MTP008_SYSCTL_SENS1 1501 /* 1, 2, or Beta (3000-5000) */
#define MTP008_SYSCTL_SENS2 1502
#define MTP008_SYSCTL_SENS3 1503
#define MTP008_SYSCTL_FAN_DIV 2000 /* 1, 2, 4 or 8 */
#define MTP008_SYSCTL_ALARMS 2001 /* bitvector */
#define MTP008_SYSCTL_BEEP 2002 /* bitvector */
#define MTP008_ALARM_IN0 0x0001
#define MTP008_ALARM_IN1 0x0002
#define MTP008_ALARM_IN2 0x0004
#define MTP008_ALARM_IN3 0x0008
#define MTP008_ALARM_IN4 0x0100
#define MTP008_ALARM_IN5 0x0200
#define MTP008_ALARM_IN6 0x0400
#define MTP008_ALARM_FAN1 0x0040
#define MTP008_ALARM_FAN2 0x0080
#define MTP008_ALARM_FAN3 0x0800
#define MTP008_ALARM_TEMP1 0x0010
#define MTP008_ALARM_TEMP2 0x0100
#define MTP008_ALARM_TEMP3 0x0200
#define DS1621_SYSCTL_TEMP 1200 /* Degrees Celcius * 10 */
#define DS1621_SYSCTL_ALARMS 2001 /* bitvector */
#define DS1621_ALARM_TEMP_HIGH 0x40
#define DS1621_ALARM_TEMP_LOW 0x20
#define DS1621_SYSCTL_ENABLE 2002
#endif /* def SENSORS_SENSORS_H */
|