Software: Apache/2.0.54 (Fedora). PHP/5.0.4 uname -a: Linux mina-info.me 2.6.17-1.2142_FC4smp #1 SMP Tue Jul 11 22:57:02 EDT 2006 i686 uid=48(apache) gid=48(apache) groups=48(apache) Safe-mode: OFF (not secure) /usr/share/setools/ drwxr-xr-x | |
| Viewing file: Select action/file-type: Audit Log Analysis Tool for Security Enhanced Linux
seaudit, version 1.4.1
August 31, 2005
selinux@tresys.com
Overview:
---------
This file contains basic help information for using seaudit, an audit
log analysis tool for Security Enhanced Linux (SE Linux) audit
messages. This is the first generation of this tool so please use
with caution and report any bugs to selinux@tresys.com.
The tool does not need to be installed on an SE Linux system; it will
work in any Linux machine. The tool parses a given syslog and
extracts all load policy messages, AVC messages and change of boolean
messages from conditional policies.
The tool has the following main functions:
1) Browse and sort SE Linux audit messages.
2) Filter an audit log based on fields in the messages.
3) Query the policy based on data from a given audit message.
4) Export SE Linux audit messages to a file.
5) Generate reports in HTML or plain-text format from an
entire log or an seaudit view.
Log and Policy Files:
--------------------
Seaudit accepts the following command line arguments to open files at
startup. Zero, one, or both arguments will be accepted.
-l[FILE], --log[=FILE] open log file named FILE
-p[FILE], --policy[=FILE] open policy file named FILE
Seaudit provides you with the option of opening either a source or
binary policy file. If you do not specify a policy to open at the
command line, seaudit will attempt to use the system default source
policy location (e.g. /etc/security/selinux/src/policy/policy.conf).
If this file is unavailable, seaudit will attempt to open the system
default binary policy instead.
Note that seaudit does not require you to open a policy file; in this
case your functionality will be limited. For example, you will not be
able to use the query policy features of the tool. If a policy file is
opened it must be syntactically correct (i.e., it must not generate
errors when run through checkpolicy). Only one policy file and one
audit log can be open at a time, so if you open another one of these
files the current one will be closed.
If you get a warning when opening a log file that says: "Warning! One
or more invalid messages found in audit log.", this means that one or
more of the SE Linux audit messages either was missing a standard
message field (e.g. time, hostname, access type, etc.) or:
1) A message had an unrecognized time stamp.
2) An AVC message didn't contain permissions.
3) An AVC message wasn't labeled as denied or granted.
4) A load policy message was not in the correct form, (i.e.,
missing a line or a data field).
5) A boolean message did not contain a list of booleans.
Seaudit will still attempt to display the remaining data from the SE
Linux audit message in question along with all the other SE Linux
messages in the log, only if one of the following substrings is found
within the message:
"avc:" - indicates an access denied or granted message
"security:" - indicates a load policy message
"committed booleans" - indicates a committed boolean(s) message.
Otherwise, these messages will not be extracted from the SE Linux
audit log.
Menus:
------
The FILE menu allows you to change the current policy file and/or
audit log. It also shows a list of recently opened files. The file
menu also allows you to change certain preferences including your
default log and policy files. You can also set which columns (audit
log data fields) you would like present when you view an audit log,
as well as specify whether you would like seaudit to enable real-time
log monitoring on startup. All of these settings will be saved and
reloaded each time seaudit is started.
The VIEW menu allows you to display multiple views of a log. The
default view is created automatically once an audit log is opened.
Additional views can be created by selecting View->New under the
VIEW menu (or by pressing Ctrl + T). Each tab can be sorted and
filtered independently. The 'Save' and 'Save As..' menu items allow
you to save the settings for the view to a file and the 'Export View'
menu item allows you yo export an entire view (i.e the audit messages
contained in the view) to a file. Alternatively, you can use the
'Export Selected Messages' menu item to export only selected messages
to a file, instead of the entire view. Lastly, this menu provides the
option of viewing an entire audit message within a seperate textbox
window as it is rendered in the actual audit log. If multiple audit
messages are selected, seaudit will use the top-most selected audit
message in the current view.
The SEARCH menu allows you to filter the audit log (See Log Views
below) or query the policy (See Query Policy below).
Additionally, right-clicking on an audit message entry will display
a pop-up menu that allows you to:
- View the entire message within a seperate textbox.
- Query the policy using the message.
- Export all selected messages to a file.
The REPORT menu allows you to create report files in HTML or plain-text
format using an entire audit log or an seaudit view. (See Creating
Reports below).
Sorting:
--------
By default the messages are sorted in chronological order. To sort by
a particular field click on the column heading. The only column that
you cannot sort on is the 'Other' column. Only one level of sorting
can be performed at this time. See Known Bugs below for additional
sorting limitations.
Log Monitoring:
------------
The 'Toggle Monitor' button allows you to turn the real-time log monitoring
feature on or off. When the monitor is off, the monitor status label in the
lower right-hand corner of the status bar will display the word 'OFF', in
red; however, when the monitor is on, the label will display the word 'ON'
in green. When this feature is on, seaudit checks for new messages at a
regular interval (per second by default). This interval can be configured
from the Preferences dialog. If new messages are found they are displayed
according to the filter and sorting selections for the current view.
Query Policy:
-------------
The 'Query Policy' button opens a new dialog box that contains two
tabs. The first tab, 'Query Policy', allows you to enter search
criteria similar to that in apol's TE Rules query. If you have an
audit message highlighted when you click on this button, the search
criteria is filled in based on the message. Otherwise, all the
criteria is blank. You may enter regular expressions into the
source/target type dropdown boxes. You may type a direct match for an
object into the object class box. You may also scroll down and pick a
particular entry from the dropdown box.
The "Include Indirect Matches" checkbox alters the meaning of the
search. The search finds rules that have either the provided type
or any of the type's attributes in the appropriate field.
Clicking on 'Query Policy' displays a list of all rules fitting your
criteria. If the policy file you have opened is NOT a binary policy,
then this list will contain hyperlinks to take you to the appropriate
line in the policy.conf tab. Otherwise, hyperlinks will not be provided.
Double-clicking on a message is another way to get to the query policy
dialog box that is populated with the data.
The second tab, 'policy.conf', provides a convenient display of the
raw policy.conf source file and is only available when opening a
policy.conf file.
For more extensive policy searches and analysis, use our companion
policy analysis tool (apol).
Log Views:
-----------
The 'Modify View' button opens a dialog box that allows you to modify
a list of filters for the current view of the audit log. At the top
of the dialog box is a dropdown menu that has four different ways to apply
the list of filters. You may choose to either show or hide log entries
that match any or all of the filters in the current filter set. The View
window presents you with the option to add new filters, edit or remove
any defined filters (see Create|Edit Filters below). You also have the
option to save settings for the view to a file. Additionally, the View
window allows you to import/export filters to a file.
To export a filter click on the name of the desired filter and press the
'Export' button. You are now presented with a window where you can indicate
where you want the filter saved, and the name for it to be saved as. Once
you have selected a destination and name for the filter click 'OK' button
to save the filter to disk.
To import a filter click on the 'Import' button in the filter list window.
Navigate to the directory where the stored filter is located, and select
it. Now, click on the 'OK' button to add the saved filter to your list of
filters that were previously available for the current view.
When you click on the 'Apply' button it will apply the filters for the
associated view.
Create|Edit Filters Within A View:
----------------------------------
To add a new filter, first select the view for which the filter is needed,
by clicking on the corresponding tab. Then, click on the 'Modify View'
button near the top of the main window. You are now presented with a View
window which contains a list of filters for the view that was selected.
Now click on the 'Add' button to create a new filter. You are now presented
with a window in which you can edit the various properties of a filter such
as: its name, description, source context, target context, object type, etc.
The 'Context' tab allows you to enter values for part or all of the source
and target context, as well as the object class. Only exact matches and/or
globbed expressions (see Globbing Expressions below) are accepted for fields
on this tab, no regular expressions. You can either enter the values manually
with a comma between entries or click on the button (i.e., Types:) and get
another dialog that has a list of all valid entries. This list can be populated
by values from the log, the policy, or the union of the log and policy, by
selecting the appropriate radiobutton specification.
The 'Other' tab allows you to filter by networking criteria (i.e IP address,
port and/or interface). The IP addresses requires an exact match or a regular
expression; however, Port and Interface are by exact match only. You can also
filter by executable, path, and/or hostname from this tab. These fields accept
either an exact match or a globbed expression (see Globbing Expressions below).
The information that you provide is saved automatically, so you can just close
the window when you are done creating the filter in order to return to the
previous View window.
To edit a previously created filter simply select the filter that needs to
be changed and press the 'Edit' button. All the information that had been
previously added to the filter is now displayed in a window where you can
edit any of the properties of the filter that need to be changed. The changes
are saved automatically, so you can just close the window once you are done
editing the filter.
Clicking on the 'Clear Values' button at the bottom of either tab clears the
values in the current tab only.
Globbing Expressions:
---------------------
Using globbed expressions allows one to construct more flexible search filters
by allowing for pattern expansion instead of just static strings. There are
several different methods of globbing syntax that are supported by SEAudit.
(1) Wildcard Matching
String containing the characters '?' and '*' are said to contain widcard characters.
While, both are considered wildcards they allow for different functionality.
(a) The '?' character matches any charcter
example: ?at matches the strings- aat, bat, cat, etc.
(b) The '*' matches any string
example: sys* matches the strings- system, sysadmin, etc.
(2) Character Classes
Character classes are used when one desires to find certain characters, at a certain
position within a string. The '[' character is used to begin a character class and the
']' character is used to end the class. The characters in the string contained between
the two brackets comprise the character class, which can NOT be empty.
example: e[abz]x matches the strings- eax, ebx, ezx
(3) Ranges
Ranges are an extension of character classes which allow one to allow for finding a certain
sequential set of characters at any point in the string. The '-' character is used to indicate
a range of characters, where the character to the left of the '-' is the beggining, and the
character to the right of the '-' is the end. Multiple ranges can be used within the same
character class.
example: a[b-e]f matches the strings- abf, acf, adf, aef
example: 1[2-36-8]9 matches the strings- 129, 139, 169, 179, 189
(4) Complementation
Complementaion allows for searching using the complement of any given character class or range.
The character '!' must be the first character after '[' when one deisres to use a complementation.
When using complementations the whole complement of the whole string enclosed in the brackets after
the '!' character is used.
example: a[!b-y]z matches all three-character strings starting with a followed by any character not
occuring between b and y (inclusive), and ending in z
example: a[!c-ik-y]z matches all three-character string starting with a followed by any character
not occuring between c and i (inclusive) or between k and y (inclusive), and ending in z
*** CAUTION ***
SEAudit intersperses the use of regular expressions versus globbed expressions. So for example, the 'Edit
Filter' dialog may allow only regular expressions for certain criteria, whereas for other criteria, it may
only allow exact matches or the use of a globbed expression. The 'Query Policy' dialog only allows the use
of regular expressions or an exact match for search criteria, not globbed expressions. Additionally, note
that all characters used in globbing expressions are case sensitive.
Status Bar:
-----------
At the bottom of seaudit is a status bar. In the left corner it
displays the approximate version of the policy you have loaded along
with the policy type (binary or source). The middle displays the
number of log messages displayed "/" the total number of SE Linux
messages in the audit log. The next label shows the span of the
dates in the audit log and the right-most label shows the status
of the real-time log monitor.
Creating Reports:
-----------------
The REPORT menu allows you to create report files in HTML or plain-text
format using an entire audit log or an seaudit view. Selecting the
'Create Report' menu item displays a dialog for making configurations
to the report and then saving the report to a file. There are two
frames, one for specifying the input to the report and the other for
specifying how the report is to be created.
The input frame consists of options for indicating whether to use the
entire audit report or to use the messages displayed in the current log
view as input to the report. Also, there is an option for including
malformed messages within the report (see the previous 'Log and Policy
Files' heading for what makes up a malformed message in seaudit). This
option is only enabled when the radiobutton for using the entire audit
log is selected.
The output frame contains radiobuttons for specifying the format of the
report (i.e. HTML or plain-text). Additionally, an entrybox is provided
in this frame for specifying a stylesheet to use when creating an HTML
report. There also is an entrybox for specifying the configuration file
to use for creating the report. If the stylesheet or the configuration
file is not specified, seaudit will attempt to use the appropriate system
default files. If a report configuration file cannot be located at this
point, an error will be generated. All settings will be saved when this
dialog is destroyed. The values for the entryboxes, however, are updated
once the user has clicked the 'Create Report' button; otherwise, the
default values are maintained. You may change the default values for the
stylesheet and configuration file from the Preferences dialog, which is
accessible from the File menu.
You may configure an seaudit report configuration file to use for creating
reports in seaudit. This file is used to configure information that is to
be presented in the report. The seaudit report feature is dependent upon
this file in order to successfully generate reports. From this file, one
can configure various sections for the report, as well as create custom
sections in the report through the use of saved seaudit view files. Review
the default seaudit-report.conf file that comes packaged with your setools
distribution for more information. This file can be located in the seaudit
subdirectory or within the standard /usr/share/setools directory.
Known Bugs:
-----------
See setools/KNOWN-BUGS for a list of current bugs.
|
:: Command execute :: | |
--[ c99shell v. 1.0 pre-release build #16 powered by Captain Crunch Security Team | http://ccteam.ru | Generation time: 0.0034 ]-- |